DiFM Professional Cooling System Treatment
See What Our Customers Are Saying View More Testimonials
I used your cooling system tablets to fix several large leaks in my moms 2005 Dodge Grand Caravan. The plastic radiator tank seals on the sides of her 2 year old replacement radiator were already leaking and wasn't covered under warranty. A $200 new radiator was too expensive for her to buy at the time. Within 3 days, the leak had completely stopped. Not even a small drip. I also used this in my Ford Ranger to stop some seeping from the water outlet gasket that I've replaced 4 times due to leaking. Completely stopped the leak within an hour. It's also a great bonus that the tablets correct the antifreeze PH, stops corrosion and lubricates the water pump bearings and seals. Bars Leaks cooling system treatment is an amazing product and I will recommend it to everyone. Thank You for such a great American made product! - Ernie - Newport News, VA
- Is Bar’s Leaks DiFM 5-Gram Cooling System Treatment tablets compatible with antifreeze?
Yes, the tablets work with ALL types and brands of domestic, import and heavy duty antifreeze.
- Can Bar’s Leaks DiFM 5-Gram Cooling System Treatment tablets be installed in the new extended life antifreeze?
Yes, tablets are compatible with both conventional green or blue (Silicate-Based) and extended life red/ orange or yellow (OAT/HOAT) coolant. This includes brand names and types like Dex-Cool and GO5.
- Will Bar’s Leaks DiFM 5-Gram Cooling System Treatment tablets work with just water?
Yes, tablets work in systems containing only water. When used in water alone, it is also recommended to use a cooling system anti-rust and water pump lube for extra corrosion protection.
- How does Bar’s Leaks Professional DiFM Cooling System Treatment 5 gram tablets stop a leak?
It will seal external, internal and coolant to oil leaks. Once installed, the Bar’s Leaks particles shrink up to 15 percent. On an external leak, the tiny particles flow to the point of the leak. They then collect at the outside of the seepage and build inward. Internal leaks, the Bars Leaks particles will burn when subjected to the 5000°F heat of the combustion chamber to seal minor head gasket seepage and small cracks. On coolant to oil leaks, where coolant can seep into the crankcase contaminating the oil, the tiny Bar’s Leaks particles will seal the pores in cast iron and aluminum preventing this seepage.
- Will Bar’s Leaks DiFM 5-Gram Cooling System Treatment harm the cooling system?
No, it will not damage the cooling system. It is harmless to ALL plastic metals, aluminum, hoses and connections. In addition, it is non-toxic. Tablets fully dissolve in minutes.
- How long does it take for the Bar’s Leaks Professional 5-Gram DiFM Cooling System Treatment to stop a leak?
We recommend you drive/idle vehicle for 15 to 20 minutes. Most leaks are sealed immediately, and all others will be sealed within this amount of drive/idle time. If the leak is not sealed, a second application maybe required.
- Are these the same tablets the auto and truck manufactures use?
Yes, these are the same tablets as used by many OEM auto and truck manufacturers.
General Motors (3634621)
Ford Motor (F6SE-19A511-AA)
- Will Bar’s Leaks Professional 5-Gram DiFM Cooling System Treatment help protect the cooling system?
Bar’s Leaks Professional DiFM Cooling System Treatment 5-gram tablets are the perfect product to use any time servicing the cooling system, including parts replacement and flush & fills. It inhibits the formation of rust and scale, keeps the system clean, neutralizes pH imbalance, controls electrolysis, lubricates and seals internal, external and coolant-to-oil leaks.
- Will Bar’s Leaks plug my heater core?
No, the tiny particles will pass through a 24-gauge mesh screen (this is like a screen door mesh) which is the spec for the BIG 3 car/truck manufacturers. They say that any product installed in the cooling system must pass through this screen. Bar’s Leaks is the only stop leak to pass this test and to be approved by the vehicle manufacturers. Note: If using Bar’s Leaks to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core.
- What if I don’t have direct access to the radiator?
Remove top hose where it connects to the top of radiator and install tablets in hose. Reattach hose and tighten clamp.
- How do I pre-dissolve tablets?
Just add tablets to warm water. You may also crumble tablets for easier application.
- I have an extra large cooling system, how many tablets do I install?
Automotive, Fleet, Over-the-Road Vehicles and Stationary Equipment. INITIAL TREATMENT – Install 4 tablets per gallon of cooling system capacity. For Preventative Maintenance – Install 2 tablets per gallon of cooling system capacity every 15,000 miles. For stationary engines or heavy duty equipment which work by hours.
Equipment Hours 250 hours for every 10,000 to 15,000 miles 500 hours for every 15,001 to 25,000 miles
But one of the best things about our cooling system treatment is that you don’t have to be a car expert to use it. At Bar’s Leaks, we specialize in developing coolant seals and other automotive solutions that are fast, effective, affordable and straightforward for everyday drivers to use. If you see a puddle underneath your car and worry about the time and money it’ll take to fix, Bar’s Leaks is your source for cooling system treatments and other products.
Our coolant seal treatment inhibits the formation of rust and scale, keeps the system clean, neutralizes pH imbalance, controls electrolysis and lubricates and seals internal, external and coolant-to-oil leaks. These tablets fully dissolve in minutes and are harmless to ALL plastic, metals, aluminum, hoses and connections. It’s the strongest and most innovative treatment we make.
We engineer our products to be the fastest and safest to use, so you can rest assured that these tablets will successfully protect your vehicle’s cooling system. We offer a team of top-flight chemical engineers who are always looking for ways to improve our cooling system treatment seal and other products in service to everyday drivers like you. Before you spend the time and money to visit a mechanic for a coolant seal or treatment, discover an affordable and effective option through Bar’s Leaks. Give us a try and get your show back on the road.
America’s Best-Known and Most Trusted Stop Leak Brand
For nearly 70 years, Bar’s Leaks has been committed to serving everyday drivers with chemical repair solutions. Our products include coolant seal as well as solutions for leaks related to engine oil, head gaskets, power steering, transmissions and more. Even if you know nothing about what’s under your hood, you can easily apply a Bar’s Leaks cooling system treatment. This ease-of-use, affordability and effectiveness stems from our commitment to getting you back on the road as quickly as possible. Our entire team is always looking for innovative ways to help drivers just like you enjoy their vehicles without spending time and money to visit a mechanic. Our coolant system treatment and other products are reliable methods for solving leaks of all kinds.
You can find plenty of coolant seal options on the market, but not all options are created equal. Some may fail to treat mild to moderate leaks, and others can actually make your situation worse. At Bar’s Leaks, we offer time-tested formulations that put an end to mild to moderate leaks. These solutions are available at a fraction of the cost of visiting a mechanic. And our coolant seal and other products are developed right here in the United States, just an hour outside of Detroit. For the best in leak-stopping products and cooling systems treatments, trust Bar’s Leaks.