Introducing Bar’s Leaks Valve Seal Oil Consumption Repair (p/n VS-1) – The Solution to Stop Oil Burning & Leaking


Low oil levels. Chances are, you’ve been there.

It could be because you have a small leak, one that’s hard to pinpoint. Or you could be burning obvious oil – blue exhaust smoke is the dead giveaway. Or, maybe you have the sneakiest problem: you’re burning oil and can hardly tell. Even new cars with modern engines do this, and you only find out when you get your oil changed and you learn you’ve been driving a quart low for weeks.

We’re proud to introduce the best solution for any oil consumption problem: Bar’s Leaks Valve Seal Oil Consumption Repair (p/n VS–1). It’s a professional-grade solution to a problem that affects more cars than you think. The most common cause of valve seal leaks is age and/or high mileage. These seals can also leak due to the vehicle being stored for an extended period of time. Extended storage in particular causes drying and hardening of the seal which leads to shrinking and cracking, and consequently leaking. Using Bar’s Leaks Valve Seal Oil Consumption Repair to reverse aging damage stops oil consumption dead in its tracks.

Bar's Leaks VS-1

So don’t worry about having to spend your money on a costly repair bill. Our professional Valve Seal Oil Consumption Repair quickly and safely restores valve seals so you can get back on the road and back to your life. This product is:

    • Guaranteed to permanently reduce oil consumption
    • Reinforced with synthetic polymers
  • Safe and easy to use, and works quickly
  • Made from a synthetic blend, effective for all engines
  • The ONLY professional-grade oil consumption repair formula on the market

If your car suffers from low oil for any reason, you owe it to yourself to try Bar’s Leaks Valve Seal Oil Consumption Repair. Painstakingly engineered and tested, you can trust that Bar’s Leaks formulas are the fastest, safest way to get your show back on the road — and we’ve been proving that since 1947.

Subscribe to updates

  • This field is for validation purposes and should be left unchanged.